TIMKEN — earnings call
The transcript as filed. Every paragraph is addressable: its link names the page and the position it sits at in the call.
Prepared remarks
– TIMKEN INDIA LIMITED · MR. SUJIT KUMAR PATTANAIK – CHIEF FINANCIAL
MR. SUJIT KUMAR PATTANAIK – CHIEF FINANCIAL OFFICER – TIMKEN INDIA LIMITED
Moderator · Conference Operator
MR. ANNAMALAI JAYARAJ – BATLIVALA & KARANI SECURITIES INDIA PRIVATE LIMITED Timken India Limited August 01, 2025
Ladies and gentlemen, good day, and welcome to Timken India Limited Q1 FY '26 Post Results
Thank you very much.
We will now begin the question and answer session.
The first question is from the line of Mukesh Saraf from Avendus Spark.
Timken India Limited August 01, 2025
Mukesh Saraf
My first question is on the revenue mix.
If you could give us the mix in the first quarter?
How much was from railways and the other segments that you usually give the breakup for?
Sanjay Koul
Sure, Mukesh.
Thanks for the question and our mix in the Q1 FY '26.
Rail was INR196.5 crores which is 24% of the total pie.
Mobile was INR156 crores, 19%; distribution was INR146 crores, 18% of the pie.
Process was INR142 crores, which was 18% of the pie.
Exports stood at INR164 crores, which was 20% of the pie and a little bit of an export incentive.
So overall, it was INR808.8 crores.
Mukesh Saraf
Sure, sure.
And secondly, on the new plant, you said that you have capitalized 1 line.
Could you -- now that it has started operations, could you kind of give an update?
I think last time you had mentioned that by end of this year, you're expecting to hit a utilization of 45% for this new facility.
So how do we kind of look at it now?
Does that stay the same or is there some change to that estimate?
Sanjay Koul
I think more or less, we will be there.
We would be staying course.
The first line is capitalized.
And the other lines of spherical roller bearing etc., hopefully, will shortly get capitalized.
And we should be able to deliver almost same.
A couple of percentage here or there.
But yes, we would be there.
The factory, people, training, new lines, qualifications, PPAP, so a lot of busy time there.
And yes, to direct to your question, Mukesh, we should stay course for the kind of that target, what we spoke earlier as well.
Mukesh Saraf
Right.
In relation to this, you had also mentioned that about half of this would be exports.
And with all the noise around tariffs and the fact that there is expected weakness in the Class 8 trucks industry in North America.
We still think exports -- we're still confident that exports can kind of grow from here?
Sanjay Koul
I think obviously, this is a CRB, SRB.
So Class 8, this could be sold.
So that is out.
It is not great news on the tariff side.
So obviously, U.S. is a pretty big market.
Though for CRB, SRB, our target market of exports are rest of the world, Australia, South Africa, Europe, ASEAN, et cetera.
And obviously, some would have gone to U.S. as well.
Now how does this tariff?
Obviously, nobody knew about it previously, and nobody knows even as we speak, how it will happen by the end of the August.
So nobody can predict it.
Experts say that they might fall down to 15 eventually, but we will see.
But overall, I don't think -- it is not great news.
Obviously, U.S. is a great market.
This is a market, which everybody loves and everybody wants.
We are not connected to class -- so that is disconnected here.
Mukesh Saraf
But the overall exports, still there will be a Class 8 impact?
Sanjay Koul
Yes.
I think, obviously, we are looking at all the markets closely, and we are looking at tooling up and things like that.
And obviously, U.S. -- derisking U.S. on this is part of the whole plan.
So I don’t think it is a showstopper, but it is certainly a speed breaker a little bit here and there.
So we will risk mitigate that.
Timken India Limited August 01, 2025
Mukesh Saraf
Got that.
Got it.
And just last one clarification, sir, now that we have capitalized the lines, we have still not seen the depreciation or any fixed overheads?
Sanjay Koul
capitalised in last week of June, so you'll see in next quarter.
Moderator · Conference Operator
The next question is from the line of Ankur from HDFC Life.
Ankur
If you could just talk a little on the rail and the process market, how are these doing?
What are your growth expectations from these markets?
Would it be led more by industry growth?
Would it be led by more market share growth?
Just some more color that will be helpful?
Sanjay Koul
Sure.
So on rail, as I always say, the growth will be there.
It will be slow and steady overall.
And generally, the wagon builders have their own targets to complete.
So the last quarter is always a quarter which is always busy so that people complete the orders and things like that.
So that remains there.
This railway business and many of the businesses are cyclical in nature.
So overall, rail as a segment is not -- never going to be hockey stick.
It's going to be decent growth, and there would be some quarters of weakness, some quarters of strength.
But overall, Indian Railways is committed.
So I don't see there is any such change in the policy.
So that is happening.
And then the DFC is slowly becoming better and better and better, which means that freight goes to dedicated, you can put more passenger trains on these tracks, which means that now the passenger trains are not going to be the old Schlieren.
They are all going to be Vande Bharat platforms and which means that the tapers and connected bearings have that.
So there is two aspects to the rail.
It is passenger, it is locomotive, it is the metro, and it is freight.
So apart some segments, there is growth in the market and some segments, especially in the locomotive segment, for us, it would be also market and penetration.
Freight, we are generally leader.
So market growth and maintaining our leadership would be there.
And rail will keep on growing in India.
When you see it has to be seen on a 5-year horizon rather than a quarter-to-quarter.
And then on the process side, I think you people know that process -- the major process is stationary equipment, which is metal, which is energy and which is infra, which is cement, et cetera.
So these are -- these three, four core sectors.
So mining is weak.
It's not great.
But -- you certainly has -- solar is booming.
We don't do much solar yet in India, but we have started doing a little bit, but wind is doing very well in India and will keep on growing.
On steel, it is a mixed kind of thing.
More investments are needed to be done by the steel industry in India.
There is -- obviously, they need to be -- they need to see the demand out there.
And I think last quarter, the demand was a little bit less, and you see the melt has also gone down a little bit.
So process industries a little bit of a mixed bag there.
While wind is doing okay, steelmaking is a little bit sluggish and cement is also a mixed bag a little bit there.
And that obviously is Timken India Limited August 01, 2025 connecting to more spending on the infrastructure and then people investing in this steel, et cetera.
So overall story is going to be okay.
And quarter-on-quarter, there will be these changes.
And then geopolitics has this own emotional impact, both on the market and on the industrial people, who have to invest.
But I am kind of very optimistic that the overall story on process and rail, I always believe, knowing rail a little bit well that it is going to be slow and steady growth because of many, many factors in there.
Ankur
So reasonable to assume that rail probably grows in double digits and process maybe in high single, mid-single.
Is that how we should look at the market at this point?
Sanjay Koul
I don't think rail can be double digit.
I don't think rail can be double digit.
And though next -- this -- if you go into '26, '27, we are still saying that the overall GDP is going to be 6.1% or 3, 4, 5.
But both rail and process would be high single.
Ankur
Fair.
And also your view on the CV industry as well, if you would.
I remember you said more like a 3%, 4% growth was what you were expecting at least maybe a quarter back, but...
Sanjay Koul
Yes.
So it would be -- see, this is -- there are three ways to look at this.
One is average, one is poor, one is optimistic.
So now it is your call, what you want to look at it.
So it is between 0 to 9, you have to take your call, whether it is going to be optimistic, average or poor.
Ankur
Okay.
Fair.
And just lastly, if I may, on your gross margins, we did see a dip this quarter by about 50 basis points.
And even overall EBITDA is about 18%.
We used to be in that 20% plus range maybe a year, 2 years back.
Do you believe we can get back to that 20% plus kind of range anytime soon or is it going to be more -- still we get faster revenues and leverage, we don't get back to that 20% plus range?
Sanjay Koul
So Ankur, you have -- your question has the answer.
You know the business very well.
So when you have the volumes, your leverage is better.
When your leverage is better, your cost is better.
So it is a simple game.
In the game of manufacturing bearings, Volume leverage is a big play.
Moderator · Conference Operator
The next question is from the line of Vimal Jamnadas Gohil from Alchemy Capital Management.
Vimal Gohil
Just one follow-up on Bharuch ramp-up.
You mentioned the billing started from July.
Would it be fair to assume that whatever is being billed as of now is mostly for export markets this quarter?
Sanjay Koul
I am sorry Mr. Vimal you had started asking the question and unfortunately technology failed us and we got disconnected.
Vimal Gohil
Sure.
No issue, sir.
I will repeat my question.
Sir this was a follow up for the Bharuch ramp up that we saw this quarter.
You mentioned that we started billing from July onwards.
I just wanted to check if most of the revenues or whatever that they we have build this quarter is mostly for the export market, would that be a fair assumption or is it fairly spread out between exports and domestic?
Sanjay Koul
No, we did not billed anything in the April, May, June.
Timken India Limited August 01, 2025
Vimal Gohil
No, I'm talking from July onwards.
Whatever we are billing...
Sanjay Koul
July, it was export.
Vimal Gohil
Okay.
Fair enough.
And sir, while you mentioned the mix, is it -- if my calculation serves me right?
Sanjay Koul
No, rail was down, so volume was down.
So obviously, rail was -- generally, last quarter is good.
And our last quarter in rail last time was the best ever in 30 years, INR303 crores.
So rail was the major mix, which was down.
Vimal Gohil
Right.
And sir, if I were to look at the overall mix, it does seem that there is a fair bit of export incentive this year, about INR90-odd crores.
Is that calculation correct?.
Sanjay Koul
No. We don't have any export -- 36 million it is.
Actually, it is for the quarter is 36 million, which is about INR3.6 crore.
Wish we had INR90 crores, I would have been happy.
Moderator · Conference Operator
The next question is from the line of Rishi Vora from Kotak Securities.
Rishi Vora
My first question is around exports.
Can you just give us what would be our geographical mix at, let's say, in FY '25 or 1Q of FY '26?
And secondly, if the tariff situation persists, which is at 25% today, how will the pass-through happen with our parent?
Any color on that, that will we be able to pass on all the impact or will we need to share the cost with the parent?
Just any color on that?
Sanjay Koul
Yes.
So the verdict is not yet out on the tariff.
So obviously, in this game of negotiation, putting pressure, all that is there.
So you guys know it better than me.
So I think even if it is whatever, 15%, 20%, 25%, that is the import tariff, which has to be paid by the buyer.
So I'm a seller.
So somebody has to buy it and clear it and sell it onwards.
So now if there is 35% on China, on tapers for China, it was more than 75% for 30 years.
So that remains there.
So where are the product going to come for?
That is also a large question.
And the cost of energy and cost of labor in Europe and the problems in Europe, even if there -- this is only 15% still would weigh towards this.
So I would say that while America is a great market, and this is a market, which has obviously a huge base, close to $30 trillion.
And then the consumption is pretty significantly high.
So that market is important for everybody.
But at the end of the day, if the duties -- the way we see it between the cost of manufacturing in Mexico and their duties, cost of manufacturing in China, their duties, cost of manufacturing and the base in India and then compared to Europe, I would say that I can only assume and guess.
Obviously, we have to wait and watch how it pans out.
But at the end of the day, the cost of manufacturing in U.S. is going to go up or consumption is going to go up because putting up if the intent of the U.S. is that this will bring manufacturing in, then the infra has to be there. steelmaking has to be there, forging has to be there and casting has to be there, that infra has to be there.
Timken India Limited August 01, 2025 And the biggest thing is that is power available in the U.S.?
Is the enough energy available there? et cetera.
So I think certainly an important market, U.S. and there would be -- there are tariffs going to be.
India has, say, on steel, which is whatever 12%, 13%, 14%.
We are importing, things like that.
And if it is 15% there, they are importing.
So I'm not worried, though it is to be seen how it pans out, but it is not a worry.
And then it also gives us a good chance to make sure that you don't go after an easy market.
If you have the product, you have the technology, you have the cost, quality etc., then U.S. becomes a pretty easy market, if I can use that word.
So we don't have to take it in literal sense, compared to other markets where the currency challenges or the other related challenges are there, but it kind of forces you to excel in those markets.
And when we exported our first bearing from the new Bharuch plant was to North America, was to another new customer in a new territory.
So overall, I'm not worried.
It is a cause of how do you position yourself and how it pans out.
But overall should not be really that -- as the -- more worrisome is the U.S. economy.
That is more worrisome.
My worry is more on the U.S. economy.
How does the U.S. economy has they bottomed out or it is a soft landing and is '26 going to be coming up strongly.
I think that is more important than -- this is important, of course.
But this has to be seen how it happens.
But more important is U.S. market going to revive quickly or not.
Rishi Vora
Understood.
And sir, what would be our geographical mix of exports?
Sanjay Koul
So generally, I think it is 50-50, roughly, we have 5% here and there, generally 50-50.
And in that geography, North America, we have between the heavy truck and rail is 50-50, America.
Rishi Vora
Okay.
And in the rest of the 50, what would be our end market?
Sanjay Koul
This is the same mix, tractor, off-highway, trucks, trains, rail freight.
Rishi Vora
Understood.
And sir, my second question is on the CRB, SRB, which we have exported in the month of July.
Again, over here, what would be our end markets which we are targeting at this point in time?
And I think we are guiding for 40%, 50% exit utilization at the end of this financial year.
So as we go into second half, I am assuming that even in the domestic market, we'll start supplying.
So again, have we seen any order visibility over there or any color you could give on that would be helpful?
Sanjay Koul
Yes.
So we have -- obviously, when you start a plant, you have to first -- all the potential customers will approve those lines, PPAPs and things like that.
So those processes are on.
And -- and we certainly have a domestic market, rather a very strong domestic.
So just for the sake of application, it goes into cement industry, it goes into material handling equipment.
It goes even into railway, which we are not supplying till date.
Say, for example, in Indonesia and Malaysia, the palm oil crushing uses spherical bearings, thrust spherical and spherical.
So Timken India Limited August 01, 2025 there are diverse areas, but largely cement, energy, palm oil crushing and other related areas.
So it is even including railway.
So wherever you see in auxiliary equipment in the steel plant, auxiliary equipment in any other plant, you'll see SRB.
Generally, the difference between SRB, it is generally used where it can align itself.
If there is a misalignment a little bit, spherical have a good role to play.
And this is across, say, for example, if there is a large material handling, somebody is being a stackers, reclaimers, crushers, it will use SRB, CRBs.
Rishi Vora
Understood.
And sir, which -- like in the domestic market, have we -- do we have any order visibility at this point in time?
Sanjay Koul
Yes, we are doing the PPAPs, so we are getting qualified.
We sure have.
And as we start getting qualified, we will start pitching in for more like for railways, there would be qualifications required.
And I can tell you that one of the locomotives, we have won the first order from Indian Railways as well on a locomotive application.
Rishi Vora
Understood.
And sir, lastly, any order book which you can share for the CRB, SRB, which you have both domestic, export combined?
Sanjay Koul
No, I cannot share the order book yet because obviously, for the right reason.
But as I said that we are racing towards filling up the plant.
And as I said, the 50% utilization by the end of the year, and that is the endeavor.
Moderator · Conference Operator
The next question is from the line of Mayank Bhandari from Asian Market Securities.
Mayank Bhandari
Just wanted to highlight one point, which you have mentioned in your annual report, there is additional that you are investing INR120 crores for the capacity of cup and cones in railway facility in Jamshedpur.
So is this part of something new which you announced or you already announced it before?
Sanjay Koul
Mayank, we announced it before.
It is already announced and...
Mayank Bhandari
Okay.
So what kind of asset turnover and all you put project from this INR120 crores?
Sanjay Koul
So this is -- as our factory in Jamshedpur is catering to obviously India, Indian subcontinent also exports and then the growing need of heavy-duty bearings in South Africa and U.S., et cetera.
So it is aimed towards that.
And on asset terms, more than two for every dollar invested, that is the endeavor.
Mayank Bhandari
Okay.
So this is basically, we are getting into component manufacturing through this...
Sanjay Koul
This is capacity enhancement of what we have.
Mayank Bhandari
For the TRB only?
Timken India Limited August 01, 2025
Sanjay Koul
Yes.
These are all tapers.
These are all tapers for rail lines for railway business.
These are the tapers, which we call as CTRB.
These are sealed bearings, sealed tapered roller bearings.
Mayank Bhandari
And sir, just in terms of the export thing, you mentioned that you are more worried about the demand from the U.S. If you could just highlight?
Sanjay Koul
In general, I said, yes.
So the question was -- the answer was in general to Rishi's question was, in general, is tariff from a best cost country like India, China, et cetera.
The worry -- tariff obviously is a little worry.
Larger worry is always the -- just imagine if the American market is booming and they need bearings, do you think that tariff will be a worry?
When the offtake of demand takes and consumption needs, then the -- say, for example, the gems -- from India, the gems to America is USD10 billion.
Even if the tariff is 50%, do you think it will stop?
It will not stop.
The buyers are the guys who buy gems don't care.
It is even further investments.
So when the demand picks up, that is the time -- for example, in India, demand picks up, there is a time you get better pricing.
So it is to be seen.
Tariff is obviously is a challenge.
And especially when the world had enjoyed lower tariffs into America and people had got accustomed to whatever, 5.6% as tariff there.
So now that all of a sudden, that 10%, 15%, 20% delta, somebody has to absorb.
So that is there.
But bigger worry for the general economy is when America picks up.
So that, I would say, would be more important, more worrisome than rest, if in general, I’d say.
Mayank Bhandari
But then like which geography becomes much more attractive in terms of importing U.S.?
Sanjay Koul
So for example, Indonesia is picking up.
Vietnam is picking up.
South Africa is picking up.
Australia is also not that bad.
So other geographies are also picking up.
And North America, obviously, has it – the question is, has it already touched the bottom and the soft landing has happened or it will further fall in the next 2, 3 months, 6 months, we’ll get to know.
A lot of people are saying that next year ‘26 might be the start of the revival of America, but that is what the economy, some of the guys say‘ So yes.
Moderator · Conference Operator
The next question is from the line of Alka Chandrakant Kanase who is an Individual Investor.
Alka Kanase
My question is regarding the portfolio, parent’s non-bearing portfolio.
Do you have any plans finalized yet for India rollout?
Sanjay Koul
So this is obviously a very nice low-hanging fruit, if I can use that term, that the parent has the technology on lubrication on chains and belts and other related areas as well on linear motion bearings, on plain bearings, et cetera.
So plain bearings, we announced last time, we have started the first step of investing the first line on plain bearings, which is getting – hopefully, next year, we’ll start producing in Bharuch.
So that is happening.
But if you ask on the industrial motion big ticket item like couplings, et cetera, et cetera – so we are – we have the technology.
Now how do we do a greenfield, Timken India Limited August 01, 2025 brownfield, M&A, all that stuff.
It is a continuous discussion and continuous looking around.
So that is where we are.
It is definitely a low-hanging fruit, if I can use that term once again, I'm saying that because of the technology which is available with the parent of Groeneveld-BEKA on lubrication and then Diamond, obviously, on the chains and Carlisle is on the belt and Lovejoy on the coupling side.
So yes, it is a continuous discussion, and we have to be careful investing, looking at the markets, et cetera, et cetera.
And we are continuously looking at all aspects so that we can harness the growth in India in industrial motion.
Alka Kanase
Okay.
My next question is regarding the services income.
In process industry, we were talking of monitoring the bearings and repairing them and all that stuff.
So do we report services income separately?
Sanjay Koul
No, we don't.
We don't.
And we don't do that separately, but we are continuously, I can tell you that the endeavor is on.
We maintain almost more than two dozen sites within the steel companies where we do choking, de-choking, grinding, et cetera.
And similarly, on bearings, we do thousands of bearings for repair, which is not actually repair, which is a refurbishment is the right word for that.
And that business is bound to grow in India.
After some time, the big bearings for the wind will also need that.
So we are on that, but we are not reporting it separately.
Moderator · Conference Operator
The next question is from the line of Ankur from HDFC Life.
Ankur
Just a quick follow-on on the Bharuch factory.
And as you said, you touched about 45%, 50% utilization in the next one, two quarters.
So fair to assume this adds about INR200 crores, INR250-odd crores to your top line on a quarterly basis, assuming about INR800,000 crores annualized.
Is that how we should think of it?
Sanjay Koul
I think we will need one more quarter.
Obviously, smaller bearing are small value, large bearing are large value, we'll see the mix.
Same question we are looking ourselves currently, looking at the demand, which is flowing in.
As you can see that we have just started PPAPs and every customer has to qualify us, that is happening.
So it would be fair on my part to answer this maybe 1 quarter down the line.
Thanks.
I think we can get the last question.
I have a stop at 5:15.
So any last question, we can take that.
I think more or less, we have covered everything.
Moderator · Conference Operator
The next question is from the line of Rahul Kumar from Nuvama Wealth.
Rahul Kumar
Just one question on capex.
What is the expectation for FY '26 for capex?
Sanjay Koul
So for the rail expansion, which will happen that is INR120 crores and then the first plain bearing is roughly INR35-odd crores.
So that is on this immediate expansion capex is around INR150- plus crores that is going to happen between now and next year.
Timken India Limited August 01, 2025
Rahul Kumar
And on maintenance?
Sanjay Koul
Maintenance is the usual, that remains the usual.
So we don't.
We don't short charge.
So we go as per the norm on maintenance, so that will flow as it is flowing.
Rahul Kumar
Okay.
Thank you.
That’s all.
Thank you very much.
Sanjay Koul
Okay.
Thank you, Rahul.
Thanks a lot.
Thanks for your time today.
I'm sorry in between the line got disconnected.
I think we had answered most of the questions.
And with that, I wish everybody a very good evening.
Thank you very much.
Moderator · Conference Operator
On behalf of Batlivala and Karani Securities India Private Limited, that concludes this conference.
Thank you for joining us and you may now disconnect your lines.